X-10 Frustrations

CDJ will not receive or transmit X-10 commands via the CM11a interface. I have spent the last week troubleshooting my system and have determined it is not a hardware problem. I did this by trying different CM11a's and by testing the serial ports.

I want CDJ to respond to a generic NEC commands being sent by Pronto remote and then sending an appropriate X-10 command to turn lights on and off.

I have added the cm11a.cde file as a device called "x10". In the dialog window for adding the device, I have checked Slink-e #1 and device #1. I do not have either the IR0 or the SL0 items checked.

When I send the IR command, I get the indication the it was received but then get no X-10 response from CDJ.

My map file shows the line:

control:family_on

{x10:on[c3]}

The CM11a will not receive X-10 commands either. I have sent different on and off commands but have seen no response from CDJ.

Can anyone offer any suggestion?!!

My WAF (Wife Acceptance Factor) is at an all time low!!

Help!