| Home | |||
| Products | |||
| Slink-e | |||
| CDJ | |||
| Download | |||
| Support | |||
| Help Library | |||
| FAQ | |||
| Groups | |||
| Technical | |||
| Xantech | |||
| Master/Slave | |||
| Schematic | |||
| Contact Us | |||
| Legal | |||
| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #6
Re: Serial Cable Distance
Posted By: Colby Boles <cboles@n...> In Response To: Re: Serial Cable Distance (Barry Gordon)
Date: 10/20/99 4:31pm
CTS (clear to send). This signal is sent from the slink-e to the PC to tell the PC when it is allowed to send data to the slink-e. This prevents the PC from sending data to the slink-e faster than it can be sent out the various ports. There are a few other lines which can be looped back locally on the PC side to make the PC believe a device is present. This info is in the help under Slinke|Setting up the serial port, I believe.
Colby
| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #6 is maintained by slinke-bbs-owner@nirvis.com with WebBBS 3.21.