| Home | |||
| Products | |||
| Slink-e | |||
| CDJ | |||
| Download | |||
| Support | |||
| Help Library | |||
| FAQ | |||
| Groups | |||
| Technical | |||
| Xantech | |||
| Master/Slave | |||
| Schematic | |||
| Contact Us | |||
| Legal | |||
| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #3
Re: SLink vs. IR device files
Posted By: Colby Boles <cboles@n...> In Response To: SLink vs. IR device files (Tom Surran)
Date: 2/9/1999 1:07p.m.
Yes. The full IR command set is supported in another device file called
cdpcx200ca.cde. A note: after sending one these commands you need to send
another code to tell the unit to "release" the button by sending the S-Link
byte FE as a seperate messsage. You will need a Slinke 1.1 or 2.0 to be
sending these types of codes as they can end up with a non-byte aligned
number of bits. The newest versions of SlinkeServ include a hack make
sending the FE byte easier. e.g.
cdca:disc (disc keypress)
cdca:sl[FE] (key release - sl[] refers to a raw s-link code sent out the
same port as the cdca device is on)
| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #3 is maintained by slinke-bbs-owner@nirvis.com with WebBBS 3.21.